Autocad Civil 3d Line Types For Autocad
Mar 19, 2012 - Hello everyone, I just updated my company.LIN file and now I need to find the most efficient way to reload all the linetypes into our template and. Oct 23, 2014 - In my research, I'm suspicious that the shapes that are used to create this linetype are somehow wacky or improperly defined in the current drawing. So, when AutoCAD attempts to display the half-circle shapes, they don't appear. I'm pretty fuzzy on how to verify this theory or correct the problem, if that is the.
Complex linetypes are custom linetypes that can contain embedded shapes or text. Before you create complex linetypes using text, consider how the font settings, scaling, and colors will affect the linetype. Text style settings The text height setting will affect the linetype if it is set to a specific height other than zero (0). No other text style settings will apply, unless multiline text is placed in the drawing using the same text style defined in the complex linetype.
You must use the REGEN command to see the changes. Note: Use a text editor such as Notepad to create the complex linetype. If you try to create the linetype within the program, the following error message is displayed: INVALID number or bad continuation Before you create a linetype with text in it, define the text style that you will use.
Unless the text style used in the linetype has been defined in the current drawing, the following error message (or similar) is displayed when you try to load the line: Bad definition of (linetype name) at line (line#) of file c: Acltwin filename.lin Note: You will also receive this message if there is not a hard return, or, placed at the end of the file that you have created. If you plan to use the LTSCALE or CELTSCALE command in the drawing, the text will change to the new size. Unless you follow these rules, it will shift out of alignment with the dashes that you have created. Create the text STYLE with a height of zero. Define the linetype, using the S= for the text height. If you change the text style height, any complex linetype using that style is affected. This will take affect after a REGEN.
Use the text style exclusively for the complex linetype. Scale The following exercise will demonstrate how to create a complex linetype and change the scale proportionally. Exercise When you create the complex linetype, you will assign the actual text height for the 'S' transform.
The linetype transform values S= (text height) and Y= (Y offset) are for centering the characters. If the S=1, then you will want to offset Y=.5 to center the line. Tip: You may want to place a line of text with mtext first and use the distance command to check the character height. Some fonts adhere to standards which may cause the center to be off.
Autocad Civil 3d Trial
In AutoCAD, create two text styles. Name them mcstyle and Map. Use the txt.shx font, and set the height to zero.
Accept the defaults for all the other settings. Enter ltscale on the command line, and set the value to 1. Enter celtscale on the command line, and set the value to 1. In a text editor, create a file named test.lin and paste the following text in the file.MCSTYLE,- MC - A,1.0,-0.5,'MC',mcstyle,S=1,R=0,X=0,Y=-0.5,-2.0.MAP,- Map - A,1.0,-0.5,'Map',mcstyle,S=1,R=0,X=0,Y=-0.5,-3.0. Start a new drawing. Load the two linetypes using the test.lin file. Assign each linetype to a layer.
Set the LIMITS to 50,50 and Zoom All. Draw a line on each layer to view the different line types. Now change the LTSCALE to 2. The lines should change. Now try CELTSCALE set to 2 and place a new line on the screen.
Autocad Civil 3d Tutorials Pdf
The dashes stay in proportion to the text and everything will scale together. Linetype defined A closer look at the linetype will tell what each part means. Each item is separated by commas.